Intercord  
 
Contact No:- +91-22-2619 1524
E-mail:- intercordenterprises@rediffmail.com
anupved@hotmail.com
 
 
Diffusers / Dampers & Duct Accessories
 
 
     

Damper Quadrant Sets with Shaft Locks:

Damper Quadrant are available in Heavy guage zinc plated steel sheet with handle action. Zinc cast wing Nut G.I.Bolt for easy and faster locking adjustments. The Distinctly marked frame shows exact location of Damper. These Quadrants are suitable for square or round ducts. There is also handle locking available for round and square spindle. G.I.Spindles are available together with Damper Quadrant Sets.

Damper Quadrant Sets with Shaft Locks:

×

Bushes:

×

Bushes:

Bronze Round Bush, Brass Round Bush, Brass Square Bush Couple available. Plastic Bushes are also available for Square spindles.

Dial Regulator Sets:

Dial Regulars are available in Heavy Gauge zinc plating steel sheet with handle. Damper Regulatos are provided with Wing Nut and Bolt for easy operation. The Distinctly marked dial shows exact location of Damper. These Dial regular sets are suitable for square or round ducts.

Dial Regulator Sets:

×

Aluminium Cores for Diffusers:

×

Aluminium Cores for Diffusers:

Aluminium Cores for Diffusers are available as per specifications. These are also available in Mild Steel.

Zinc Lever / Saddles and Damper Screw Sets:

Zinc Levers/ Saddle are made from Mild Steel / Zinc plated. These Zinc Levers are used with Zinc Screws. Damper Screw Sets are made of Zinc Alloy.

Zinc Lever / Saddles and Damper Screw Sets:

×

Nylon Insulation Hangers:

×

Nylon Insulation Hangers:

Nylon Insulation Hangers pins are asthetically safe, reliable and durable for fixing insulation to HVAC ducting, ceiling etc. These hangers are designed for fixing to substrate with blind rivets, adhesive or other mechanical fixing methods. The nylon construction offers number of advantages over metal struck-up pins.Trimmed nylon pins are free of sharp edges and safe for installers. These Hangers & washers are made of high quality nylon for durability.

Ball Jointing Damper Casting:

Ball Jointing Damper Castings are made from Zinc Cast Alloy material. These are available is ¼” & 5/16” shaft sizes. Square Head Bolt for Locking and Rubber gasket for secured fixing are provided.

Ball Jointing Damper Casting:

×

Spindles:

×

Spindles:

G.I.Spindles are available in size 3/8” & ½” Damper Quadrant ¼” and 3/8” Damper Regulator Available in full square or square & flat combination.

Spring Lock End Bearings:

Spring Lock End Bearing are available in Steel Zinc Electro plated.These Spring Lock End bearings are used for panel lock systems.

Spring Lock End Bearings:

×

Strap & Set Screw:

×

Strap & Set Screw:

Strap and Set Screws are available from Mild Steel Zinc Electro Plated with square head bolt. Strap and Set Screw are used for fixing M.S.Pin on Damper blades.

Duct Corners:

Duct Corners are available in Heavy Gauge Mild Steel Zinc Electro plated materials. Standard Sizes available are 25 mm and 35 mm. These Corners make easy slides in profiles for Ducts.

Duct Corners:

×
 

"Due to policy of continuous improvement, the specifications are subject to change without prior notice. Measurements are subject to 5 % tolerance"		  
<< BACK   NEXT >>
 
 
Home   |   ABOUT HVAC   |   CONTACT US
 
Address :-

408 E-Square, Subhash Road, Above State Bank of India, Next to Sunteck, Vileparle East,Mumbai -400057, India
Tel: 022-26191524 / 022-26191525
Mobile No: +91-9833781181 / +91-9821125507
Email:intercordenterprises@rediffmail.com		  

   
2014, All right reserved.
Design by :- Eskon Web Solutions